Made with Anagote Timber

Show us your work

This section is for you!
We want to see what you've made with our timber. If you have something to contribute just upload an image and some details here.


Electric Guitar

This was built using Queensland Maple for the back and neck, Rosewood fretboard and the top was Silky Oak (was a piece I already had), I was very impessed with the workability of the Qld Maple and the final result was way better than I expected.
I will definitely use Anagote timber again.

Made by Tim Shannon

Tags: ,


Straight outta Compton

Made this sign for my sister and her husband after they moved to Compton street. Couldn’t think of anything that would be funnier than making this for them.
Tasmanian Blackwood. Routed out by hand. Airbrushed. Epoxy resin

Made by Luke Apps

Tags:


Rumsey Guitars

My custom guitar made from Australian Blackwood, Queensland Maple, Wenge and American Rock Maple. The beauty of the Blackwood made this guitar stand out.

Made by Dave Rumsey

Tags: , , ,


Goblet

For this goblet, I used some new guinea rosewood from Anagote. I used my mini lathe from record power (Dml250). I sanded it to 12000 grit with some micromesh and finished it with some Kunos oil then some wax. It took about 1 day of work. I am very happy with my work because I have only been doing wood-turning for about 4 months and I am “underage” for most turning classes.

Made by Daniel

Tags:


Wooden Strip Canoe

Wooden Cedar Strip Canoe made from Western Red Cedar, Silver Ash and Red Mahogany

Made by Ethan McDonald

Tags: , ,


Chess Board

560×560 (55mm squares) Chess board made from Maple, Wenge and American Walnut.
Finished with satin Osmo Polyx-Oil.

Made by Vlad

Tags: , ,


Hope Chest

This is the hope chest that my student Nick recently completed using a stunning array of timber from Anagote. The box features hand cut dovetails and a resin inlay in a top with quarter sawn Silky Oak, hence the ray figure. The carcass is made using quarter sawn NG Rosewood with a “bees wing” figure. Inside the box is a set of Silver Ash trays which also has fiddle back figure and the Black Walnut pins were handmade. The trays are lined with orange leather also from a local supplier, John at Hide Leather. This project not only shows a high level of skill from a student but also showcases local Marrickville businesses. Thank you to the boys at Anagote for their help in directing me to such wonderful boards.

Stuart at Heartwood Creative Woodworking

Made by Stuart Faulkner at Heartwood Creative Woodworking

Tags: , , ,


Dining table and chairs

Made from Silky Oak from Anagote finished with 4 coats varnish and carnuba wax polished with fine steel wool. Chair backs are Aust cedar veneer applied to laminated plywood. Made with dropsaw, router, biscuit joints and lots of sanding! The features in the grain sparkle especially under lights.

Made by Alistair

Tags:


Tallowwood Table Top

Tallowood table top
Made using Festool Dominos and Titebond glue. Sanded down to 400 grit then applying a few coats of Feast Watson hardened Tung Oil. Fabricated steel base powered coated black.

Made by Jack Nunn

Tags:


Double Bass 2004

Queensland Maple (Flindersia Breyleyana) Back and sides. Wood purchased from Anagote Timbers.

European spruce for sound board (not purchased through Anagote).

Neck and scroll hand carved in European maple (not purchased through Anagote).

Tailpiece hand carved in Gidgee collected from fallen tree in paddock.

Handmade tuning gears and buttons, European maple bridge, endpin spike assembly and all other hardware except strings.

Finished in traditional violin oil varnish.

Made by Lachlan Tumeth

Tags: