Made with Anagote Timber

Show us your work

This section is for you!
We want to see what you've made with our timber. If you have something to contribute just upload an image and some details here.

Dining table and chairs

Made from Silky Oak from Anagote finished with 4 coats varnish and carnuba wax polished with fine steel wool. Chair backs are Aust cedar veneer applied to laminated plywood. Made with dropsaw, router, biscuit joints and lots of sanding! The features in the grain sparkle especially under lights.

Made by Alistair


Tallowwood Table Top

Tallowood table top
Made using Festool Dominos and Titebond glue. Sanded down to 400 grit then applying a few coats of Feast Watson hardened Tung Oil. Fabricated steel base powered coated black.

Made by Jack Nunn


Double Bass 2004

Queensland Maple (Flindersia Breyleyana) Back and sides. Wood purchased from Anagote Timbers.

European spruce for sound board (not purchased through Anagote).

Neck and scroll hand carved in European maple (not purchased through Anagote).

Tailpiece hand carved in Gidgee collected from fallen tree in paddock.

Handmade tuning gears and buttons, European maple bridge, endpin spike assembly and all other hardware except strings.

Finished in traditional violin oil varnish.

Made by Lachlan Tumeth


Architectural Model

Architecture Model- Winning Competition Entry for Ian Potter National Conservatory, designed by CHROFI.
Mahogony, CNC milled, satin finish

Made by Make Models


Lathe tool


Hand made TC tipped lathe tools. Stainless bar stock hand polished to 2000 W/D. Timbers sourced from Anagote – Karri, Vic ash, Zebrawood.

Made by Richard L

Tags: , , ,

Entertainment unit with bookshelves


Kauri Pine, finished with Danish oil.

Made by Nathaniel Grey



Rocking Horse


Kauri pine. Hand carved. Stained jarrah and sprayed with satin lacquer by tattoo artist Rev Mayers

Made by Luke Apps



Tags: ,

Feast Platter


This is a ‘feast platter’ with figured Tas Myrtle centrepiece, and Silky Oak feature strips and Silver Ash highlighters

Made by Chris Falvey

Tags: ,

Tiphareth 6FF Prototype by Nightingale Guitars


Tasmanian Blackwood top & control cover
QLD Maple body & neck (from Anagote timber) with dyed maple laminates
Indian Rosewood fretboard
25.5 – 27.5 scale length (straight fret at the 9th)
Mother of pearl ‘N’ logo
Copper ring with black epoxy infill side and fret dot markers
Magnetic control and truss rod covers
Black ABS binding
Sperzel Trimlok tuners 3×3
Schaller locking strap buttons
Black neck mounting ferrules x5
Bare Knuckle Cold Sweat pickups
500k potentiometers
Black knurled vol and tone knobs
Dimarzio EP1111 pickup selector
Jescar medium profile frets
Black recessed ‘bowl’ or ‘cup’ jack

Made by Fraser Nightingale


Large cabinet

Large four door/four drawer cabinet. Made from ash and grey gum. All joints are mortise and tenons, no nails or screws. Draws are dovetail joints with face plates. Bowl in pin oak is from wood turner Andrew Early of South Africa
Made by Chris Falvey




Tags: ,