Carved from a two-piece Qld Maple block joined with hide glue.
The top of the bass was carved from Sitka. Blackwood was used on the back and sides.
Other pictures of the finished instrument
Made by Matthew Tucker
Carved from a two-piece Qld Maple block joined with hide glue.
The top of the bass was carved from Sitka. Blackwood was used on the back and sides.
Other pictures of the finished instrument
Made by Matthew Tucker
This was built using Queensland Maple for the back and neck, Rosewood fretboard and the top was Silky Oak (was a piece I already had), I was very impessed with the workability of the Qld Maple and the final result was way better than I expected.
I will definitely use Anagote timber again.
Made by Tim Shannon
My custom guitar made from Australian Blackwood, Queensland Maple, Wenge and American Rock Maple. The beauty of the Blackwood made this guitar stand out.
Made by Dave Rumsey
Queensland Maple (Flindersia Breyleyana) Back and sides. Wood purchased from Anagote Timbers.
European spruce for sound board (not purchased through Anagote).
Neck and scroll hand carved in European maple (not purchased through Anagote).
Tailpiece hand carved in Gidgee collected from fallen tree in paddock.
Handmade tuning gears and buttons, European maple bridge, endpin spike assembly and all other hardware except strings.
Finished in traditional violin oil varnish.
Made by Lachlan Tumeth
Keith Richards-inspired Telecaster; Queensland Maple finished with Tru-Oil
Made by Malcolm
Built using Queensland Maple. This is a diatonic accordion in D/G
Made by Rick Hull
Double bass scroll in Qld Maple from Anagote.
Carved from a two piece laminated block, finished in tinted Ubeaut hard shellac.
The rest of the instrument was made from recycled Silky Oak and Western Red Cedar with Wenge trim.
Made by Matthew Tucker
Left handed LP style guitar using Anagote timbers. The body and neck are Honduran Mahogany capped with QLD Maple. Fret board is Indian Rosewood.
Made by Mal Macrae.
Les Paul JR/Custom hybrid made from a one piece Queensland mahogany body with a bookmatched Tasmanian blackwood cap and neck of Queensland rock maple. Finished with Z-poxy pore filler followed by thin wipe on polyurethane.
Made by Harry Aznavoorian
A solid body electric guitar made from Queensland maple, stained red and finished with Rustins Plastic Finish.
Made by Murray